• Home
  • TW-6.2 Ratchet Torque Wrench 10-60Nm 3/8 Inch
TW-6.2 Ratchet Torque Wrench 10-60Nm 3/8 Inch

Park Tool TW-6.2 Ratchet Torque Wrench 10-60Nm 3/8 Inch

Product code: PPRTMAINTTW62
  • $155.00

The TW6.2 is a high-quality ratcheting click-type torque wrench that precisely measures and applies the correct amount of torque to threaded fasteners.

With the increasing number of lightweight components and torque specifications found on bicycles, a good torque wrench is necessary for every mechanic. The TW-6.2 is a high-quality ratcheting click-type torque wrench that accurately measures and applies the proper amount of torque to threaded fasteners. The TW-6.2 is designed for higher torque settings that can be found on components such as bottom brackets, cassette lockrings, and crank bolts. Features a 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. Comes in a protective case.

 

  • Torque range: 10 to 60 Newton meters (88 to 530 inch-pounds)
  • Adjustable in 0.25 Nm increments
  • Ratcheting 3/8" drive
  • Reads and registers torque values for both left-hand and right-hand threading
  • Calibrated to be accurate to +/- 4%
  • Length: 362 mm (14.25")
  • One-year warranty 

 

RelatedProducts

  • Park Tool BKM 1.2 Hydraulic Brake Bleed Kit For Mineral Oil

    Park Tool BKM 1.2 Hydraulic Brake Bleed Kit For Mineral Oil

    Built for the rigours of daily commercial use, the BKM-1.2 contains all you need to bleed your mineral-oil-based disc brakes and restore them to that factory-fresh braking performance.
    From $170
  • Park Tool AWS-7 Hex Wrench And Torx Key Set

    Park Tool AWS-7 Hex Wrench And Torx Key Set

    Park Tool combines the three most commonly used bike tools—4mm and 5mm hex wrenches and a T25 Torx® key—into a single Y-wrench, making essential servicing and setup easier than ever.
    From $25
  • Park Tool DAG-3 Derailleur Hanger Alignment Gauge

    Park Tool DAG-3 Derailleur Hanger Alignment Gauge

    Diagnose and repair bent or misaligned derailleur hangers with Park's DAG-3 alignment gauge.
    From $175
  • Park Tool DT-5.2 Disc Brake Mount Facing Set

    Park Tool DT-5.2 Disc Brake Mount Facing Set

    The Park Tool DT-5.2 is designed to accurately face front or rear disc brake mounts, ensuring precision alignment.
    From $680
  • Park Tool PCS-9.3 Home Mechanic Repair Stand

    Park Tool PCS-9.3 Home Mechanic Repair Stand

    The PCS-9.3 is an essential folding workstand meticulously designed for home mechanics.
    From $305