Ribble Gran Fondo Headset 1 1/8 - 1 1/4
SKU: RIBBHSTR295000000000
Out of stock
Out of stock
28.65
Read all Q & A or Ask a Question
Estimated delivery
-
Standard Untracked Delivery - Royal Mail
US$11.01
-
Tracked Delivery - Royal Mail
US$16.51
Related Products
Description
Gran Fondo Headset 1 1/8 - 1 1/4
A replacement headset for the 2017 Ribble Gran Fondo
Does not include a fork expander or top cap
Specifications
| Brand | Ribble |
|---|---|
| Discipline | Road, Triathlon |
| Steerer Diameter | 1 1/8" - 1 1/4" Tapered |
| Headset Fitment | Integrated Tapered |
Reviews
Be the first to review this product
Write a Review
Q&A (3)
-
-
Hi. I need the headset for the 2014 gran fondo.
Will this one fit? Cheers -
Thank you for your question.
For a 2013-2016 Gran Fondo, you would require a standard Ribble-branded headset - http://www.ribblecycles.co.uk/ribble-headset-branded-ribble-1-1-8-hidden-its-45-x-45/#pid=26247
Chris,
Ribble Cycles
-
Hi. I need the headset for the 2014 gran fondo.
-
-
I bought a Gran Fondo 12 months ago (2018). Do I require this headset as it states it’s for 2017?
After stripping it down I have 2 cartridge bearings of different sizes. Not sure which bits to measure - inside vs outside? -
HI,
Thank for your question.
We'll get the description amended slightly as it's not to clear as it stands. This is the headset for last design of the Fondo which has the 27.2mm diameter seatpost and tapered head tube. Pre 2017 the forks were not tapered and the seatpost diameter was 31.6mm.
Team Ribble
-
I bought a Gran Fondo 12 months ago (2018). Do I require this headset as it states it’s for 2017?
-
- Looking to buy cartridges elsewhere due to no stock, it’s there a part number mm size you can provide?
-
Hi,
Thanks for your inquiry,
Over the years there have been 3 variants of the Gran Fondo and all require a different headset. If at all possible we would advise you to check the existing bearings as the dimensions should've stamped on them. If you have the last variant then you will require 1 1/8" to 1 1/4" 45x45° bearings.
41.8x30.5x8mm; lower 46.9x34.1x7mm
Best Regards
Team Ribble
Ask a Question